Description
Lonseal Lonwood Striated Sheet Vinyl Flooring
Lonseal Lonwood Striated is Lonseal’s premium linear wood-grain sheet vinyl flooring, featuring a distinctive thick combed texture that mimics hand-finished linear timber. Designed with a continuous vertical grain layout, Lonwood Striated creates a spacious, open visual effect across commercial interiors, marine vessels, custom campervan conversions, and specialty vehicle builds.
Engineered for high-traffic environments, it features Lonseal’s factory-applied Topseal® urethane finish to simplify routine cleaning, resist scuffing, and eliminate the need for initial or routine wax applications. Its non-porous, waterproof sheet vinyl construction makes it a superior choice over standard hardwood or laminate in areas exposed to moisture, dirt, and heavy foot traffic.
Key Highlights & Features
- Distinctive Combed Wood Grain: Natural striated wood-grain appearance with a tactile, thick combed texture that hides surface dirt and scuffs.
- Spacious Visual Design: Continuous linear design stretches spaces visually for a modern, open architectural layout.
- Topseal® Factory Protection: Heavy-duty urethane finish eliminates the need for floor finish or wax and protects against daily wear and staining.
- Specialty Vehicle & Marine Approved: Meets FMVSS 302 flammability standards (49 CFR §571.302) for RVs, campervans, motorhomes, and boat interiors.
- Low-VOC & Eco-Friendly: FloorScore® certified, GreenAir® low-VOC formulation, GreenMedic® antimicrobial protection, and EU REACH compliant.
- Heavy-Duty Commercial Performance: Conforms to ASTM F1303 Type I, Grade 1, Class B commercial standards.
Frequently Asked Questions & Maintenance Guide
Q: What adhesive is recommended for installing Lonwood Striated?
A: For standard vehicle subfloors, commercial spaces, and high-moisture marine installations, apply using Lonseal #650 Two-Component Epoxy Adhesive with an approved U-Notch Trowel. For vertical wall flash coving, use Lonseal #400 Contact Adhesive.
Q: How do you clean and maintain Lonwood Striated per manufacturer specifications?
A: Per official Lonseal Topseal® specifications, perform daily cleaning using a microfiber dust mop or vacuum to remove debris. Damp mop using a properly diluted neutral pH cleaner with a microfiber wet mop pad. For periodic deep cleaning, scrub with a red buffing pad on a low-speed (175–300 RPM) rotary floor machine using diluted neutral pH cleaner. Do not attempt to strip Topseal® or apply acrylic floor finishes.
Q: Is Lonwood Striated suitable for custom campervan and RV conversions?
A: Yes. It complies with FMVSS 302 flammability requirements (49 CFR §571.302), making it safe, flame-retardant, and highly popular for custom campervan upfits, motorhomes, and mobile trailers.
All colors will vary from monitor to monitor. We always recommend requesting physical sample swatches before placing an order to verify color tone.
Specifications
| Width | 6 ft. (72 in.) (1.8 m) |
| Roll Length | 60 ft. (18.3 m) |
| Overall Thickness | 0.080 in. (2.0 mm) |
| Wear Layer Thickness | 0.020 in. (0.5 mm) |
| Weight | 0.7 lb./sq. ft. (72 oz./sq. yd.) |
| Pattern / Texture | Thick Combed Linear Wood Grain Texture |
| Finish | Factory-Applied Topseal® Urethane Finish (No Wax Required) |
| ASTM Classification | ASTM F1303 Type I, Grade 1, Class B, Commercial Use |
| Flammability Compliance | Meets FMVSS 302 / 49 CFR §571.302 |
| Environmental Standards | FloorScore® Certified | GreenAir® Low VOC | GreenMedic® Antimicrobial | EU REACH Compliant |
| Recommended Applications | Custom Campervans, RVs, Marine Interiors, Retail, Corporate Offices, Healthcare Facilities, Specialty Vehicles |
| Sold | By the Linear Foot |
| California Prop 65 | ⚠️ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more at Lonseal.com/prop65 |
Installation & Technical Guides
Installation Overview & Key Requirements:
- Approved Adhesive: Lonseal #650 Two-Component Epoxy Adhesive spread using an approved U-Notch Trowel for high-moisture marine environments, commercial spaces, and vehicle subfloors.
- Jobsite Conditions: Maintain ambient and substrate temperatures strictly between 65°F and 85°F (18°C–29°C) for 48 hours prior to, during, and after installation.
- Initial Maintenance Wait Time: Always wait a full 48 hours after installation before conducting initial floor cleaning or maintenance.
Download Official Lonseal Documents:








